neodymium magnets

Cast vintage bevel Alnico 5 magnets

Alnico 5 magnets produce a bright tone with a tight low end and stinging highs. Great in the neck position, they help keep the tone clear without getting muddy.Cast Alnico 5 guitar rod magnets similar to the ones found in vintage pickups from the ’50s. As one of the top magnet suppliers in the nation, we can offer prices and selection for guitar pickups and magnets that is competitive and quality made.
  • Item NO.:

    BHAM-01
  • Lead Time:

    25-30 days
  • Product Orgin:

    China
  • Shipping Port:

    Shanghai
  • min order:

    1000pcs
  • Grade:

    Alnico 5
  • Product Detail

Cast vintage bevel Alnico 5 magnets

In terms of magnetic strength the Alnico V rod magnets are the strongest of the three when compared to Alnico II or Alnico III. Bright, glassy tones with a punchy aggressive attack. Alnico 5 rod magnets were used in the mid 1950’s Stratocaster guitars and are still considered the weapon of choice by many guitarist.

Alnico 5 polepieces- set of six staggered(not same height) rods for telecaster or Stratocaster type guitar pickup assembly. Alnico 5 power delivers harsher more trebly sound than an alnico 3 magnet. Please note that we supply these items as unmagnetised for easier assembly of your guitar pickup.

ALNICO 5 Rod Cylinder Magnets Vintage Top Style

Products description

* Magnet Meterial: Alnico 5 / Alnico V / A5

* Top Characteristic: Flat Top, Vintage Top, Modern Top(Chamfer)

* Diameter: 0.187 in / 0.195 in / 0.250in

* Length: 0.471 in 0.630 in 0.650 in 0.665 in. 0.671 in 0.688 in 0.693 in. 0.710 in 0.719 in. 0.780 in

* Magnetizing Options: Do Not Magnetize / North Up / South Up

Alnico V Guitar Magnets

Key Advantages Of Alnico:

Excellent temperature stability

Strong corrosion resistance

The maximum working temperature is up to 550°c

Fine grain

Compact crystal.

Excellent magnetic consistence and evenness.

Suitable for small volume and complex shape magnets.


Guitar pickups magnets features

Different types of guitar pickups use different numbers of alnico magnets, usually one, two, or six, depending on their design. If just one or two magnets are used, they are usually found as bar magnets mounted beneath the pickup's coil, which charge steel pole pieces running through the coil.

Magnets of different compositions are also used in different pickup designs, and these play a big part in shaping these components' sounds, too. Following are the main types and their characteristics:

Grade Br(KGs) Hcb(Oe) Bhmax (MGOe) Density(g/cm3)
Alnico2 7.0 600 1.6 7.2
Alnico3 6.5 500 1.2 6.9
Alnico4 8.0 600 4.0 7.3
Alnico5 12.0 600 5.0 7.3
Alnico8 8.0 1380 4.75 7.3


Request a free quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Custom Guitar Pickup Magnets

AlNiCo Rod Magnets For Guitar Pickups

Alnico is an acronym referring to aluminum (Al), nickel (Ni) and cobalt (Co). These elements are combined with iron, copper and sometimes titanium to create permanent magnets that are excellent for high-temperature use and offer good corrosion resistance.  
ALNICO5 Speed Sensor Magnet

Cast AlNiCo Cylinder Magnet for Sensors

The wheel speed sensor magnet has been used as a core component of the wheel speed sensor for a long time. The AlNiCo magnet can be classified as cast AlNiCo magnet and sintered AlNiCo magnet. For a wheel speed sensor magnet, the sensor manufacturers will use the cast type.
Cast AlNiCo Magnet Cylinder Magnet

Cast AlNiCo Cylinder Magnet for ABS Sensors

Alnico Magnet is a kind of alloy which is comprised of aluminum, nickel, cobalt, iron and other microelements. There are two  different  manufacturing processs for ALNICO: Cast and Sintered. Cast ALNICO can be made into many sizes and shapes, and better magnetic properties than Sintered ALNICo. Whereas Sintered ALNICo is usually restricte1
Alnico III Round Bar Magnet with Beveled Top

Alnico 3 vintage bevel rod magnets

Alnico magnet material is made by alloying aluminum, nickel and cobalt with iron. Some grades also contain copper and/or titanium. The alloying process is casting or sintering. The process and the heat treatment needed to optimize magnetic properties produces hard (Rc45) and brittle parts that are best shaped or finished by abrasive grinding. Cast 1
ALNICO 5 Rod Cylinder Magnets modern Top Style

Alnico 5 modern beveled top magnets

Alnico V is really the most popular magnet here. This is the most versatile magnet of them all. Prominent treble response and a strong bass response. For the longest time, this magnet was the strongest of the group.
Customized Alnico pickup magnet for guitar

AlNiCo 5 rod magnets for guitar pickups

AlNiCo material is comprised of aluminum,nickel,cobalt and iron with varying additions of other elements. There are two different manufacturing processes for AlNiCo:Cast and sintered.Cast AlNiCo can be made into many sizes and shapes,whereas Sintered AlNiCo is usually restricted to smaller sizes. However,both processes lead themselves to complex ge1
AlNiCo Bar Shaped Cow Magnet

High Quality AlNiCo Cow Magnets

Cow magnets are popular with dairy farmers and veternarians to help prevent hardware disease in their cattle.While grazing, cows eat everything from grass and dirt to nails ,staples and bits of bailing wire (refered to as tramp iron). Tramp iron tends to lodge in the honeycombed walls of therecticulum, threatening the surrounding vital organs and c1
AlNiCo 5 cow stomach magnet

Strong rod alnico cow magnets

Cow magnets are veterinary medical devices used to treat and prevent hardware diseases. Farmers and veterinarians use bovine magnets to attract hardware diseases by attracting metals from the rumen and mesh. The farmer or veterinarian inserts the magnet of the cow into the mouth of the cow and then into the second stomach of the cow and attracts th1
Custom Guitar Pickup Magnets

Alnico Bar Magnets for Guitar Pickups

Alnico magnets are made from an alloy of aluminum, nickel, and cobalt, mixed with iron and some other metals. Alnico was used in the vast majority of classic pickups through the 1950s and ’60s. It comes in different compositions, with Alnico II, III, IV (though quite rare), and V used in pickup making. These run approximately from softer to stronge1
Customized Education AlNiCo Magnets

AlNiCo Educational Magnets for School

Alnico is an acronym referring to a family of iron alloys which in addition to iron are composed primarily of aluminum (Al), nickel (Ni) and cobalt (Co), hence al-ni-co. Alnico alloys are ferromagnetic, with a high coercivity (resistance to loss of magnetism) and are used to make permanent magnets. These alnico magnets are carefully painted red, fo1
Rare Earth Alnico Humbucker Magnet

Rare Earth Alnico Guitar Pickup Magnets

Alnico magnets are made from an alloy of aluminum, nickel, and cobalt, mixed with iron and some other metals. Alnico was used in the vast majority of classic pickups through the 1950s and ’60s. It comes in different compositions, with Alnico II, III, IV (though quite rare), and V used in pickup making. These run approximately from softer to stronge1
ALNICO5 Magnet For ABS Wheel Speed Sensor

Strong AlNiCo Permanent Magnets For Sensors

AlNiCo (Aluminium, Nickel, Cobalt and Iron alloy) is obtained by casting process, shaped in cheap phenolic resin sand moulds. It is the oldest and most stable magnetic material, with temperature coefficients of -0,03%/°C (Br) and -0,02%/°C (HcJ). It can operate in environments up to 500 °C with a very good resistance against corrosion, therefore co1
U Shaped Horseshoe Alnico Magnets

Education Horseshoe Alnico Magnets

Alnico is hard and brittle, and prone to chipping and cracking. Special machining techniques must be used to machine this material. Alnico magnets require magnetizing fields of about 3 kOe (kilo Oersted). Because of their relatively low coercivities, special care should be taken to assure that alnico magnets are not subjected to adverse repelling f1
U Shaped Teaching Alnico Magnets

Permanent AlNiCo bar shape educational magnets

Generally, hard ferrite or cast AlNiCo is used widely due to lower cost and good property. Many shapes, sizes and colors are available for clients' choice. We usually paint them in red or blue, or we combine them with other material such as metal and plastic. Meantime, these products comply with the international safe standards. It is safe to child1
High Quality AlNiCo Horseshoe magnets

U Shape Alnico Educational Magnets

U shape alnico magnets are widely used in teaching and playing.  Cast AlNiCo is used widely due to lower cost and good property. Many shapes, sizes and colors are available for clients' choice. We usually paint U shape alnico magnet in red or blue, or we combine Alnico Horse Magnet with other material such as metal and plastic. Meantime, these1
Red Alnico Horseshoe Magnet

Red Cast Alnico5 Bridge Magnets

Alnico magnets are made by casting or sintering aluminum, nickel, and cobalt with iron and small amounts of other metals to enhance the magnet grade’s specific properties. Magnetism is very stable in Alnico magnets, even in high-temperature technical applications. They can be formed in fairly complex shapes and produce highly magnetic fields in cer1
Customized Isotropic AlNiCo Speedometer Magnets

AlNiCo Ring Shaped Magnet for Speedometer

Alnico materials(composed predominantly of aluminum, nickel, and cobalt with minor amounts of other elements including titanium and copper) permit design latitudes providing high indications, high energies and relatively high coercivities.
Alnico ring magnets for Loudspeakers

Large Alnico Ring Magnet for Speakers

AlNiCo Ring Magnet is comprised of aluminum, nickel, cobalt, and iron with varying additions of other elements. There are two different manufacturing processes for AlNiCo: Cast and sintered. Cast AlNiCo can be made into many sizes and shapes, whereas Sintered AlNiCo is usually restricted to smaller sizes. However, both processes lead to complex geo1
Alnico Ring Magnets

Customized Alnico Ring Magnets For Motors

Alnico magnet is an acronym referring to a family of iron alloys which in addition to iron are composed primarily of aluminum (Al), nickel (Ni) and cobalt (Co), hence al-ni-co. They also include copper, and sometimes titanium. Alnico alloys are ferromagnetic, with a high coercivity (resistance to loss of magnetism) and are used to make permanent ma1
Strong Power Ring AlNiCo Magnet

Casted Ring Shape AlNiCo Magnets

Cast magnets may be manufactured in complex shapes, such as horseshoes, not possible with other magnet materials. Sintered Alnicos offer slightly lower magnetic properties but better mechanical characteristics than cast Alnicos. Cast Alnico5 is the most commonly used of all the cast Alnicos. This material is used extensively in rotating machinery, 1
Leave a message
welcome to BearHeart
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

News

Contact