SmCo ring magnet is a high performance, low temperature coefficient permanent magnet with its high working temperature-350 degree centigrade. When working above 180 degree centigrade, its maximum energy product BH and steady temperature are superior than NdFeB magnetic materials. Sintered SmCo needn’t to be coated because it is difficult to be erod1
According to the different components of the SmCo5 and Sm2Co17, respectively, they are the first generation and the two generation rare earth permanent magnetic material. Because of its raw materials are scarce, the price is expensive and limit the development. Samarium cobalt (SmCo) as the second generation rare earth permanent magnet, not only ha1
Samarium cobalt magnet is mainly formed by the metal samarium, cobalt and some other rare earth elements of the permanent magnet.It has a high magnetic energy product, super low temperature coefficient,and the operating temperature can up to 300 ℃.At the same time, it has a strong corrosion resistance and oxidation resistance. Therefore, SmCo magne1
Alnico magnet is an acronym referring to a family of iron alloys which in addition to iron are composed primarily of aluminum (Al), nickel (Ni) and cobalt (Co), hence al-ni-co. They also include copper, and sometimes titanium. Alnico alloys are ferromagnetic, with a high coercivity (resistance to loss of magnetism) and are used to make permanent ma1
Alnico magnets are made from an alloy of aluminum, nickel, and cobalt, mixed with iron and some other metals. Alnico was used in the vast majority of classic pickups through the 1950s and ’60s. It comes in different compositions, with Alnico II, III, IV (though quite rare), and V used in pickup making. These run approximately from softer to stronge1
Alnico V is really the most popular magnet here. This is the most versatile magnet of them all. Prominent treble response and a strong bass response. For the longest time, this magnet was the strongest of the group.
Alnico 5 magnets produce a bright tone with a tight low end and stinging highs. Great in the neck position, they help keep the tone clear without getting muddy.Cast Alnico 5 guitar rod magnets similar to the ones found in vintage pickups from the ’50s. As one of the top magnet suppliers in the nation, we can offer prices and selection for guitar pi1
Alnico magnet material is made by alloying aluminum, nickel and cobalt with iron. Some grades also contain copper and/or titanium. The alloying process is casting or sintering. The process and the heat treatment needed to optimize magnetic properties produces hard (Rc45) and brittle parts that are best shaped or finished by abrasive grinding. Cast 1
Radial Ring Magnets are manufactured with the north and south pole on the outside diameter (OD) and inside diameter (ID). These can be used as motor magnets, sensor magnets, and any applications were multiple or single poles are required on the OD or ID of the magnet.
Neo rings are one of the most popular shapes of rare earth magnets. BEARHEART Magnetics supplies a wide range of them in different sizes and with several different coatings such as Nickel, Zinc, Epoxy or Gold to prevent and reduce wear and corrosion.
The permanent magnets used in speakers are called speaker magnets. Speaker power is dominated by the power consumption of coin. Speaker magnets use the same specifications and same magnetic material, but different in amounts of magnetization, the speaker power, sensitivity and transient expression are also different. It is not simply think that the1
Neodymium Permanent Magnet (also known as NdFeB, NIB or Neo magnet ), the most widely used type of rare-earth magnet, is a permanent magnet made from an alloy of neodymium, iron and boron to form the Nd2Fe14B tetragonal crystalline structure.Multiple choices of shapes can meet specific customer requirements.
IPv6 network supported
